FRP Panel

Add(Factory)：3A, Huanyuan East Road, Lechang Industrial Transfer Park, Shaoguan City, Guangdong Province

Add(Sales Center): F1503, Kingdom Plaza Center, Dongcheng Middle Road, Dongguan, Guangdong, China

Tel:+86-0769-22361118

Fax:+86-0769-22361116

E-mail：sales@hgfrp.com

dghgfrp@hgfrp.com

Your location：Home>FRP Panel>FRP Pebbled Panel

FRP Pebbled Panel

FRP embossed panel is the product item HIGOAL made huge investment on developing, width of which can reach up to 2800mm, with the characteristics of resistance to corrosion, mould, humidity and electricity, etc.

HIGOAL FRP panel has a significant advantage, that is easy-cleaning. Gel coated FRP panel is exceptionally resistant to scratch, negligibly effected on by blood, detergents and bleach disinfectant. FRP gel coat panel is the ideal hygienic panel.

There are different embossed pattern for your customers, it can be customized upon requirement.

HIGOAL pebbled panel
Standard thickness: 1.2mm/1.5mm/2.0mm/2.5mm/3.0mm
Customized thickness: 1.0mm/ 4.0mm/ 5.0mm
Standard color: white，creamy，grey etc.
Customized color: RAL color.

HIGOAL chequered plate, as following, with width of 1200mm:
Max width: 1200mm
Standard thickness: 1.5mm/2.0mm/2.5mm/3.0mm
Standard color: white, grey
Customized thickness: 3.5mm/4.0mm/5.0mm
Customized color: All RAL

Above FRP panel can be combined as sandwich panel, with XPS core, gypsum, plywood, PP and aluminum honeycomb, etc.

FRP flat panel is continuously made, can be produced into sheets or rolls according to the specific requirement. The standard sheet size is 1220x2440mm, and panel rolls is 100-400m per roll ( the thinner panel will be packed with longer length as roll, the thicker panel will be packed with large roll core, and less length)

When the thickness is more than 3.5mm, it is not convenient to roll, so it is recommended to make in sheets.

There is a gel coat layer without glass fiber on the surface of FRP panel, which makes the product more rigid, and glossy, better perform in appearance and UV and yellowing resistance. With the gel coat, the gloss of panel is well retained to enhance the weathering-proof property. As there is no glass fiber contained in gel coat layer, the surface toughness is relatively poor. It might be cracked, when the panel suffer from excessive tensile strength, specially during making sandwich panel.

Some factors cause FRP gel coat panel cracks:

1. Bending diameter: FRP panel contains reinforced glass fiber fabric, which makes it different from common thermoplastic. Its bending diameter must be larger than 500mm, or it may crack.
2. Impact: Manufacturing the sandwich panel, if there is protruding spot, such as sand grain or other substance, it will easily crack during combining.
3. Loading & unloading, and transporting: It should not be bent during moving the FRP panel, or would easily damage the products.

Higoal use automatic machinery to roll up FRP panel, and is strict and experienced on packing and transportation. There is no possibility of panel breakage before delivery. Therefore, Higoal do not accept any returned panels after unrolling, unless a reasonable statement is presented.

无码人妻一区二区三区V 国产精品无码理论片在线现看 不卡国产色视频 轮流内射av

无码人妻一区二区三区V 国产精品无码理论片在线现看不卡国产色视频轮流内射av